Chapter 1 · Bridge support control

Smash Fest Level 8 Guide — Collapse the Glass-and-Wood Bridge

Level 8 contains seven glass and wood objectives arranged as a bridge. The structure spans four nominal columns and two rows, provides six cannonballs, and sets par at three. Its strategy is support, which fits a bridge: the elevated span only remains useful while lower contacts carry it. The empty space beneath or beside the bridge is not a target.

The level rewards a controlled support removal followed by careful reassessment. Glass may break when the span falls, while wood may topple or remain on the platform as a live objective. The opening should disturb a lower support, not the middle of empty air. Shots two and three depend on whether the bridge rotates as one piece, splits, or drops flat.

Smash Fest Level 8 starting layout with a bridge of seven glass and wood targets — Level 8's elevated glass-and-wood span depends on lower supports. Releasing one end converts the stable bridge into a rotating collapse.

Cannonballs

Materials

Glass · Wood

Par

Targets

Separate supports from the elevated span

The seven-target count makes each piece important. Lower targets hold the elevated pieces and define the route the bridge will take when it loses balance. A hit on a high glass target can remove that target but leave the supports standing. A hit through a lower support changes every contact above the same side.

Compare the two ends before firing. One side may offer a clearer fall direction or a more direct support contact. Choose that side for the opening, then keep the opposite support as a provisional second target. The actual settle overrides the plan if the span breaks or moves farther than expected.

Opening plan: release one end of the bridge

Aim at a lower support beneath one end of the span. For glass, use a centered impact; for wood, use a line that topples the support out from under the structure. The desired result is a rotation that brings the elevated targets down through one another.

Wait after the support moves. A bridge can pause against the opposite side before sliding farther, and wood can continue rotating after glass has already broken. Do not use shot two until you know whether the remaining live objectives form a standing support, a flat cluster, or isolated pieces.

Step-by-step Level 8 plan

Contact a real lower support
Move the reticle away from the open span and onto a target that carries one end. Center the first hit and give the upper bridge a clear direction to rotate.
Wait through the full drop
Track the span, the opposite support, and any wood rolling on the surface. Confirm the remaining-objective count only after all three have settled.
Remove the surviving load path
If the opposite support still holds targets, aim low at that support. If the bridge is already flat, choose the lowest stable material in the cluster instead.
Reserve shot three for the new shape
Break isolated glass directly or push a wooden objective toward the nearest edge. Do not continue aiming at the original bridge coordinates.

Why bridge levels demand reassessment

A bridge is defined by relationships between span and supports. Removing one support converts an elevated, stable arrangement into a rotating system. That motion creates glass impacts and changes where wooden objectives rest. The opening shot therefore has value beyond the single object it contacts.

After the drop, however, the bridge relationship may no longer exist. The remaining targets can form a flat pile or separate pieces. Reassessing avoids wasting later shots on empty space or on a support role that the object no longer plays. This is why Level 8 pairs support recognition with post-collapse flexibility.

Alternative when the span balances on one support

If the first end falls but the span leans safely against the opposite support, target that lower contact with shot two. Aim so the support moves away from the leaning weight, not deeper beneath it. Then wait again: the second rotation may clear both the span and the support without a third structural shot.

Common Level 8 mistakes

Shooting under the bridge

The opening is empty space. Verify that the reticle covers a physical lower target before release.

Breaking span glass first

A high direct clear can leave both supports and the remaining elevated structure stable.

Using the old map after collapse

Once the bridge drops, target the new contacts. Original support coordinates may contain nothing useful.

Level 8 replay checklist

The opening removed or toppled a lower support.
The span and wood completed their movement before shot two.
The second aim matched the post-collapse structure.
Shot three stayed available for an isolated material-specific clear.
No ball was fired through the empty bridge opening.

Continue learning

Replay Level 8 from the browser game, then compare the result with the material and support principles in the related guides. Physics can settle differently after small aim changes, so use the visible target count as the final check.